HP ILO 4 PROLIANT G7 SERIAL
HP ILO 4 PROLIANT G7 DRIVERS
HP ILO 4 PROLIANT G7 PC
HP ILO 4 PROLIANT G7 FREE
HP ILO 4 PROLIANT G7 WINDOWS

Originally, the Mini SAS Cable attached the four (4) SATA drives to the System Board. In Figure 5 the RR2720 is installed with the HP Mini SAS Cable attached to Port 2 of the RR2720 (attaching the HP Mini SAS Cable to Port 2 gave me a few extra millimeters of cable to work the connector in position). The HP Mini SAS Connector that fans out to provide the SATA connections in the main four drive bay of the MicroServer is also clearly visible.ДЇigure 5- System Board installed - the HP Mini SAS Cable is attached to Port 2 on the RR2720 while the StarTech Cable is attached to Port 1 Note the red SFF-8087 cable that will provide four additional SATA III connections in the ODD bay area. The RR2720 is shown in Figure 4 installed on the N54L System Board. In Figure 3 I have replaced the standard size bracket on the RR2720 with the low profile bracket that was included in the box with the RR2720.ДЇigure 4- The Highpoint RocketRAID 2720 SGL installed onto the N54L System Board The System Board power connector is long enough that I didnвЂ™t need to disconnect it.ДЇigure 3- The low profile bracket installed

In Figure 2 the System Board has been removed from the MicroServer and the RR2720 box is ready to unpack. The HP MicroServer Self Repair Videos are another excellent resource to study before working on the MicroServer вЂ“ links to them are available at вЂњ Useful MicroServer Links & ReferenceвЂќ.ДЇigure 2- The HighPoint RocketRAID 2720SGL being prepared for installation The HP ProLiant MicroServer Maintenance and Service Guide and various other User Guides can be found at and are a valuable reference when adding or removing devices on the MicroServer.

HP ILO 4 PROLIANT G7 FREE

On previous MicroServers it had been my experience that the Mini SAS Cable connector was very difficult to remove from the System Board - requiring the вЂњworking overвЂќ of a very small screwdriver to free it up. One early, pleasant, surprise was the ease that the Mini SAS Cable could be detached from the System Board shown in Figure 1.

HP ILO 4 PROLIANT G7 DRIVERS

Later, during installation of the RR2720 I used the most current drivers and software downloaded from the HighPoint website instead of the disk that was packaged with the new RR2720.ДЇigure 1- Mini SAS Cable detached from System BoardД®xcept for a N54L on the System Board, instead of a N40L, the new MicroServer is a duplicate, as far as I could tell, of the MicroServers I have reviewed in the past.

HP ILO 4 PROLIANT G7 WINDOWS

The latest Windows Web RAID Management => v2.1.

The latest Windows Drivers for Windows 7, 8, Vista, 2008 => v1.

On the Storage Configurations page I downloaded:

Data: 2* Crucial M4 256GB SSD in RAID0 вЂ“ ID: RAID_0_1Д«efore I pulled the HighPoint RocketRAID 2720SGL (вЂњRR2720вЂќ) from its box I went to HighPointвЂ™s website at and clicked on the вЂњ Storage ConfigurationsвЂќ tab.

OS: 2*Seagate 250GB (HP branded VB0250EAVER ) in RAID0 вЂ“ ID: RAID_0_0.

HP ILO 4 PROLIANT G7 PC

Nippon Labs SATA Adaptor Molex 4-Pin PC Power Cable to 2 x SATA Converter Cables #POW-SATA-2.

HP ILO 4 PROLIANT G7 SERIAL

StarTech Model SAS8087S450 19вЂќ Serial Attached SCSI SAS Cable вЂ“ SFF-8087 to 4x Latching SATA.

4GB RAM: 2*2GB Stock HP Sticks: 2GB came Stock with the HP ProLiant N54L G7 MicroServer and I added to that the spare Stock 2GB stick that came with my N40L (вЂњ RangerвЂќ).

Later, I will flash the BIOS-MOD to either test the eSATA Port multiplier or when I remove the RAID card and need to use Ports 4 & 5.

Unlike my work previously, I decided to NOT flash the BIOS-MOD on the N54L - planning instead to testВ the HighPoint RocketRAID 2720SGL andВ notВ using any of the onboard SATA II Ports of the N54L - making it unnecessary to unlock the stock BIOS to get the increased speed of Ports 4 & 5 or set those Ports to AHCI. In a previous writing I compared the rated performance of the CPUвЂ™s and having worked with the N40L in the past I was anxious to try out the N54L. The HP ProLiant N54L G7 MicroServer (вЂњMicroServerвЂќ or вЂњN54LвЂќ) is the third variation in the MicroServer line at HP (N36L w/system board #620826-001, N40L w/system board #661787-001, and N54L w/system board #708503-001). I chose to wait on flashing the BIOS-MOD - electing instead to do some testing with the stock HP BIOS which, by-the-way, is the same as the stock BIOS ( #O41 JвЂ“ see Figure 10) that came with my HP ProLiant N40L MicroServer a year earlier.

The HP ProLiant N54L G7 MicroServer looks exactly like its predecessor HP ProLiant N40L MicroServer.

Hp ilo 4 proliant g7